ACCESSORIES

ACCESSORIES FOR C-RANGE & A-RANGE TURBINE METERS

Accessory Family Map

Standard Remote Kit

Comprises: Cast aluminium cover plate; sensor; dust cover for LCD display and 3m of 2 conductor belden 12664 or 8451 shielded cable.

Allows display to be situated remote from meter body (up to 90m with extra cable)

Extends operating temperature range of turbine to -40 to +121 degrees centigrade

F.M. Remote Kit

Comprises: cast aluminium sensor and cover plate combined; dust cover for LCD display and 3m of 2 conductor belden 9501 shielded cable.

Maintains Factor Mutual Approval of meter.

N.B. use of back plate modifications invalidates this approval.

Allows display to be situated remote from meter body (up to 30m with extra cable)

Extends operating temperature range of turbine to -40 to +121 degrees centigrade

Conditioned Signal output Module

Comprises: sensor and cover plate combined and 3m of Belden 9363 cable.

Increases signal transmission distance up to 1500m.

Extends operating temperature range of turbine to -40 to +121 degrees centigrade.

Can be configured to give either open collector square wave from 9 to 35V D.C./45 mA max. input or 6V square wave output from 2 internal batteries.

Back Plate Accessories for use with A-Range Meters ONLY

Analogue Output Module	Comprises: nylon 6/6 housing with internal electronics and 3m of Belden 9363 cable	with a loop powered input of 7 to 30V a D.C. loop output of 4 to 20 mA is generated.
Pulse Access Module	Comprises: nylon 6/6 cover plate with internal electronics and 3m of Belden 9363 cable	An external power supply of 0-60V at up to 100mA generates a square wave pulsed output with amplitude as the supplied voltage. Increases signal transmission distance up to 1500m

Calibration vessels for use with any meter

Calibration Vessel

5 litre and 20 litre sizes.